Installing and using DVDFab 12 DVD Copy

dvdfab-icon

DVDFab's DVD copy app with copy protection removal

DVDFab DVD copyIs a Chinese software vendor DVDFab SoftwareA DVD copy software developed by (formerly Fengtao Software) that can remove copy protection, and compresses (transcodes) the data recorded on DVD-DL (DVD 9) to DVD-R (DVD 5). You can also copy it.

DVDFab DVD Copy is fully functional during the trial period (30 days) or within the trial limit (3 sheets), and can be used free of charge if either the trial period or the trial limit is exceeded. DVDFab HD Decrypter Automatically migrate to.
Free version restrictions
・ Some adult DVDs cannot be copied 
-Fake vts protection protected DVDs cannot be copied 
・ The latest copy guard release is not supported
・ Only full disc and main movie can be used
・ Output range cannot be specified by chapter
-Compression (transcoding) is not supported
-ISO image file output is not possible (possible with ImgBurn setup)
-Writing to a DVD blank disc is not possible (possible with ImgBurn setup)
See below for DVD copying and ripping
dvd-shrink0011

Basic knowledge of DVD copying and ripping

Procedure and basic knowledge for saving DVD contents as a video file Rip is used synonymously with copy / backup / dubbing by importing DVD / Blu-ray data to a computer using dedicated software […]

 

This application has the ability to unprotect DVDs, and unprotecting discs violates the "avoidance of technical safeguards" of copyright law.
Copyright law and illegal activities

System requirements

Version 12. 0 Currently

OS: Windows 7/8 / 8.1 / 10/11
CPU: Pentium II 500 MHz
RAM: 512 MB
Storage: 20 GB or more free space

DVD-RW drive

Where to get the software

DVDFab official download page

DVDFab 12 DVD Copy Installation

DVDFab DVD Copy DVDFab 12 Because it is a module ofDVDFab 12 All-in-one To install.

See below for installation instructions
dvdfab-icon

Installing and using DVDFab All-in-One

DVDFab's strongest ripping / copying app with DVD / Blu-ray deprotection function DVDFab All-in-One is a Chinese software vendor DVDFab Software (formerly Fengtao […]]

Meta information settings

By default, DVDFab is set to match the disc title information against the DVDFab server and download the relevant metadata.

DVDFab-12-All-in-One-013

After adding metadata, the media server app will display meta information such as cover art and performers.

dvdfab-dvd-ripper-024

The meta information supports Japanese, but some titles may be in Chinese, and the titles are displayed in Chinese when played on the media player.

Chinese title metadata mp3tag It can also be modified using.

dvdfab-dvd-copy-12-030

If you don't need the meta information  Common setting  Of General から メ タ Select I want to use meta information Uncheck.

How to use DVDFab 12 DVD Copy

DVDFab DVD copy From the home screenCopy  Select and use.

Insert the disc into the drive after starting DVDFab, or eject the tray when DVDFab starts.

dvdfab-dvd-copy-12-001

In the tools menu Copy Select and top left Copy mode After specifying the mode to use in, insert the disc into the drive or drag the ISO file to DVDFab to start parsing the disc.

After disk analysis with the free versionIf you want to read this disc, you need to order the paid version Is displayed, the copy protection of the target disk is not supported and cannot be used.

dvdfab-dvd-copy-12-005

When the disc is recognized, information such as title, data size, audio, and subtitles is displayed.

dvdfab-dvd-copy-12-016

The loaded source is task It is added as, and you can enable / disable the task with the button on the far right.

The task becomes invalid when the menu is switched or the output process is completed.
Meta information

If the cover art is not displayed or a different cover art is displayed in the environment where the use of meta information is enabled, correct it.

DVDFab12-DVD-Copy-009

Click "Search Movies / TV Shows" to make corrections.

dvdfab-dvd-copy-12-027

Disc type After selecting the content type with, title Enter the title in the item of Years Leaves blank Search Products Click, select the relevant title from the search results, click "Confirm", and meta information such as cover art will be displayed, so reflect it in "Output".

Copy guard information

The copy guard used for the disc is displayed under the title. 情报 You can check with.

DVDFab12-DVD-Copy-004

protection is removed If you copy a disc with the corresponding item with the copy guard that cancels the item described as, the copyright law Avoiding technical safeguards Conflict with.

Copy mode

In copy mode Full disk-Main movie -segmentation-Combine-Customize-clone There are three types of full-disc main movie clones that are used for normal copying.

The free version is Full diskMain movieOnly available.
Full disk
Copy the entire contents of the disc and write it to a blank disc, or output it as an ISO image file or BD folder.
Main movie
Only the main part is copied, excluding the menus and bonus videos recorded on the disc.
Customize
You can freely set the output without the restrictions on full discs and main movies.
Clone / writing
A lossless copy that produces exactly the same as the source, supporting direct writing to blank discs or output to an ISO file.
segmentation
PieceThe data recorded on a double-sided (DVD 2) DVD is divided into a single-sided single-layer (DVD 9) disc, one disc with the main title, and a disc with other titles.
Combine
Multiple discs can be combined into a single disc and automatically transcoded if the source data size is larger than the target disc size.
clone Copy the contents of the disk unchangedFull diskCan compress (transcode) DVD 9 to DVD 5, operate menus, and change volume labels.
Main movie

The main movie is Main story Is automatically selected, but if you want to output a title other than the main part such as a bonus video, change the selected title.

dvdfab-dvd-copy-12-017

To change the output title Select another title Select the title to output from.

You cannot select multiple titles.
Chapter selection

Main movie -Customize-Combine In this mode, you can specify the chapters to record.

dvdfab-dvd-copy-12-

If you want to output only any chapter, specify the chapter range after setting the title.

Transcoding (compression)

Transcoding is the process of adjusting the video bit rate to the target size, and the higher the compression ratio, the more likely it is that block noise will occur in situations where image quality deteriorates or there is a lot of movement.

DVD 9: Single-sided dual-layer DVD -DL (2 GB)
DVD 5: Single-sided single-layer DVD -R (1 GB)
When outputting DVD 9 to DVD 5 on a full disc, the deterioration of image quality can be suppressed by adjusting the compression ratio to a low level by selecting subtitles or audio in the main movie.

DVDFab12-DVD-Copy-005

The copy settings of the imported DVD are displayed under the title,to DVD 5 Is transcoded (compressed) to fit on a single-sided, single-layer, 1 GB DVD-R. to DVD 5 The compression size and compression ratio are displayed to the right of.

DVDFab12-DVD-Copy-006

From the list of disc sizes when writing to a single-sided dual-layer 2 GB DVD-R DL disk 9 choose.

Make sure that the source and output files are the same size (100%) because the compression feature is not available in the free version.

Subtitles / audio

In the main movie, customize, split, and combine modes, you can select the audio / subtitles to record.

DVDFab12-DVD-Copy-007

"▶" in front of the check box is the default audio, so specify it in consideration of the combination with subtitles.

To change it, click the beginning of the audio / subtitle specified as the default.

Advanced Setting

Volume label and menu operations Advanced Setting Can be set with.

dvdfab-dvd-copy-12-013

navigationIt is possible to change the menu operation when setting the DVD.

PathPlayer Is a function to copy only the files required for playback on the player, which is enabled by default in DVDFab 12.Common settings> DVD> PathPlayer At the link destination of Change DVD playback order , Remove unnecessary PGC Etc. can also be selected.

task

Since tasks are added automatically, there are cases where tasks that were interrupted due to an error are registered. Current task All the tasks added to are executed even if the check box is not checked, so it is recommended to check before executing the output processing.

dvdfab-dvd-copy-12-031

The number of tasks to perform Task list Since it is displayed in, click the task list if unnecessary tasks have been added.

dvdfab-dvd-copy-12-033

If unnecessary tasks are registered, enable the check box and click "Delete".

dvdfab-dvd-copy-12-034

The deleted task is Garbage can Click to display the list in the lower pane, and click the arrow at the right end of the task to restore it.

dvdfab-dvd-copy-12-037

Archive Tasks that failed to be processed are automatically added to, so select them if you do not need them and click "Delete".

If the task processing fails and the task is saved in the archive, DVDFab will ask you to execute the incomplete task when you start it. If you cancel it, it will be automatically deleted from the task archive.

Write to blank disc

When writing to a disc, DVDFab saves the data in a temporary folder and writes the saved data using the writing function.

The free version does not support writing to blank discs.

dvdfab-dvd-copy-12-039

Output destination After specifying the optical drive from the list and setting the number of copies, click "Start".

If no metadata has been added, a dialog will be displayed on output, but you can continue with "Cancel".

dvdfab-dvd-copy-12-041

When the copy process is complete, the drive tray opens automatically and a dialog is displayed asking you to insert a blank disc.

Output of ISO image file / DVD folder

If you want to save the data on your PC with an ISO image file or DVD folder Output destination To the right of ISO image file or folder Select the output format with the icon and specify the save destination.

The free version does not support output to an ISO file.

dvdfab-dvd-copy-12-042

Click the save format icon, specify the save location, and then click "Start".

DVDFab Mini

DVDFab Mini The additional function has been removed CopyRipping An app that specializes in.

dvdfab-dvdcopy034

Since the explanation is displayed at startup Do not redisplayCheck the box and click "OK".

dvdfab-dvdcopy036

What can be used with DVD copy Copy Only after selecting the copy mode from full disk / main movie and deciding the output size Destination You can copy the DVD by specifying and clicking "Start".

DVDFab DVD Copy Purchasing Procedure

DVDFab DVD Copy has no license expiration date and can be permanently updated Indefinite edition And the license has an expiration dateSubscription version Is provided and the subscription version will be automatically renewed Cancellation procedureIf you do not, you will be billed regularly.

DVDFab DVD Copy Purchase Page

dvdfab-sale-info-025-1

To purchase a license, go to "Buy Now" on the product page.

dvdfab-sale-info-024

Click "Buy Now" in the plan you want to purchase to proceed with the purchase procedure.

The indefinite version may be on sale Campaign page confirm.
After paying with a credit card or Bitcoin, register as a DVDFab member and activate the product with the registered email address and password.
Latest sale information and purchasing method ・ Cancellation of subscriptionSee the page below
dvdfab-icon

DVDFab Sale Info Latest Sale Information and How to Buy

DVDFab sale information and purchase procedure ・ Introducing license registration method DVDFab can remove the copy guard developed by DVDFab Software (formerly Fengtao Software) in China […]

Related article

dvdfab-icon

Installing and using DVDFab All-in-One

DVDFab's strongest ripping / copying app with DVD / Blu-ray deprotection function DVDFab All-in-One is a Chinese software vendor DVDFab Software (formerly Fengtao […]]

dvdfabpasskey-icon

Installing and using DVDFab Passkey for DVD / Blu-ray

DVDFab's DVD / Blu-ray deprotection tool that also supports CPRM DVDFab PassKey is a copy game developed by Chinese software vendor Fengtao Software […]

streamfab-icon

Install and use StreamFab All-in-One

Download videos from video streaming services and video sites StreamFab All-in-One is a Chinese software vendor Chinese software vendor DVDFab Software (formerly Fengtao So […]

PlayerFab-icon

Installing and using PlayerFab All-in-One

Media player that can play streaming video / video files / DVD / BD / UHD BD PlayerFab All-in-One is a Chinese software vendor DVDFab Software (formerly Fengt […]]

dvdfab-icon

DVDFab Deactivation and Reactivation Procedures

DVDFab deactivation and reactivation procedures required when moving a computer DVDFab is linked to the hardware information of the computer and saved as user information when the product is activated, so DVDF […]