Installing and using elby CloneDVD 2

A user-friendly DVD copy app that works well with Redfox AnyDVD HD

elby CloneDVD Is a Swiss software vendor Elaborate Bytes AG It is a DVD copy app developed by the company that can transcode (compress) DVD-R DL to DVD-R, copy it to a blank disc, output an ISO image file, and output it to a DVD folder.

elby CloneDVD does not have the function to remove the copy protection of DVD, so if you use protected DVD, it is separate. Redfox AnyDVD HD You need an unprotection app.
DVDFab Passkey for DVD However, ripping is possible, but it is not recommended because it is incompatible and the error rate during processing is high.

It is available free of charge during the 21-day trial period, except for output to an ISO image file.

See CloneBD for a Blu-ray copy

Installing and using elby CloneBD

Elby CloneBD, a user-friendly Blu-ray copy app that works well with Redfox AnyDVD HD, is being developed by Swiss software vendor Elaborate Bytes AG […]

System requirements

Version 2. 9 Currently

OS: Windows XP / Vista / 7/8/10 (32 & 64bit)
CPU: 1 GHz or higher
RAM: 1 GB or more
Storage: 5 GB or more free space

Where to get the software

elby CloneDVD official download page

Install elby CloneDVD 2

The elby CloneDVD installer does not include adware or spyware.

Click "Download" on the product page.

Launch the downloaded installer and when the User Account Control dialog is displayed, click "Yes" to allow it.

Check the license agreement and if there is no problem, "Agree".

Leave the default installation settings as "Next".

If you are not particular about the installation destination, set the default setting to "Install".

Click "Close" to complete the setup.

The trial period is 21 days from the first boot, and a dialog is displayed every time CloneDVD is booted until the license is purchased and activated.

How to use elby CloneDVD 2

The operation of CloneDVD is in the form of a wizard, so follow the displayed instructions.

Recording of DVD titles

Recording of DVD titles Is a copy of the title recorded on the DVD, and the file size can be reduced by omitting menus and bonus videos.

Whether to insert the DVD in the drive ISO image file The Virtual drive After mounting on DVD title recording choose.

Title composition

Title composition On the screen, specify the source and set the output media size.

DVD video file In the item of reference Click the icon.

Unzip the drive containing the DVD or ISO file and put it on the disc. VIDEO_TS Select a folder and click OK.

The titles recorded on the DVD are displayed, and the checked titles can be confirmed in the preview.

Save menu If the menu is recorded on the DVD, the menu will be copied at the same time.

情报 You can check the information of the selected title on the tab.

Select the media you want to copy and click Next.

If the media size specified in the list is smaller than the title, it will be transcoded (compressed). Compression rate Is displayed on the quality gauge.
When the quality gauge is 100%, the output is uncompressed, so the quality is not degraded (lossless).

One layer on one side: 1 GB
DVD +/- R DL: 8.54 GB
Mini DVD (8cm DVD): 1.4 GB
DVD-RAM: 4.7 GB
CD-R: 700MB
Custom: Can be specified to any size

Chapter cut

Chapter cut is a function that allows copying in chapter units, and it is possible to output without deterioration by dividing a DVD whose original size exceeds 8 GB into two DVD-Rs.

Chapter cuts are below the preview Scissors Click the icon and operate the bar that appears below the seek bar to specify the range of chapters to output.

Audio and subtitle settings

Audio and subtitle settings Now select the audio and subtitles to record.

The most effective way to reduce the compression ratio with transcoding is to cut the audio, so you can remove unwanted audio and subtitles in the right pane. Stream settings Uncheck with and click "Next" when the settings are complete.

When the audio / subtitles are unchecked, the quality gauge changes, and the two scales displayed indicate the quality when all the audio subtitles are unchecked and when all are recorded.

In the lower left pane, you can select audio and subtitles for each title, but the official website recommends setting in the right pane.

Selection of output method

Selection of output method Let's change the output format DVD folder-ISO / UDF image file-DVD drive Select from.

When outputting in a DVD folder, specify the save destination.

During the trial period ISO / UDF image file Is not available.

When writing to a blank DVD disc DVD drive After selecting, change the speed setting as you like and click "Start".

maximum Is set to the lower maximum speed supported by the drive and media, and other speeds are automatically set to the lower maximum speed supported by the drive and media if the maximum speed is lower than the set speed. NS.

When transcoding (compressing), it is better to check the image quality before writing to the media, so it is recommended to write after outputting to the DVD folder once.

When transcoding, the comparison with the original is displayed visually.

If there is no transcoding and the output is lossless, an animation of a sheep eating popcorn is displayed.

DVD drive If you select, the drive tray opens after transcoding and a dialog prompts you to insert blank media.

Clone DVD

Clone DVD is a mode that copies all recorded data such as menus, bonus videos, audio and subtitles.

When copying with a full disc Clone DVD choose.

Recording of DVD titles You can select titles and cut chapters in the same way as above, and the operation method is the same.

Writing existing data

Writing existing data Now you can burn the output DVD folder or ISO image file to a blank DVD disc, or output the DVD folder as an ISO image file.

Writing existing data Only DVD folders and ISO files can be selected with.

To burn a DVD folder or ISO image file Writing existing data choose.

Source selectionAnd the DVD folder is DVD movie file , ISO file ISO / UDF image Select, specify the folder or file, set the speed of the DVD drive, and then click Start.

In the paid version DVD movie file You can also turn the DVD folder into an ISO image file with.

When making multiple copies, after writing is completed Eject After ejecting the disc with, set the next blank disc and execute "Write" to make multiple copies in succession.